Open time: 8 : 00 AM - 5 : 30 PM (Monday - Saturday)
Available on backorder
Made possible by the unique combination of Olympus optics and today’s newest digital imaging technology, the DSX510 digital microscope is the culmination of a long history of superior engineering, design, and manufacturing. The microscope minimizes glare, delivers accurate color reproduction, and eliminates flare and distortion. Every sample is reproduced with such accuracy that it’s simply stunning, and stunningly simple. Take a closer look at the DSX510, and see what other digital microscopes cannot.
Ideal for any industrial microscopic observation method, the DSX510 offers a variety of observation modes that deliver the highresolution images users expect from high-end optics.
Sample appearance can vary depending on quality of material, surface conditions, or illumination methods. One of a variety of observation methods made possible by the advanced digital technology of DSX510, the HDR (High Dynamic Range) function, combines several images taken at different exposures to accurately correct brightness differences on the sample surface, delivering a more consistently accurate sample rendition. HDR provides high-fidelity images that show not only textures but also flaws and defects that were previously undetectable. Glare can also be reduced for more comfortable observation.
If a non-reflective image area cannot be seen, merely increasing illumination power is often not enough, as glare can occur. The DSX510 eliminates this issue with WiDER, a proprietary image processing system that takes care of high-contrast problems with one click. No blackouts. No glare.
The color enhancement feature of DSX510 allows color to be placed where it is needed while leaving the rest of the image in black-and-white, making it much easier to locate defects. Ideal for focusing on one particular defect.
Inspection is easier when you can highlight possible defects or contamination for inspection
Main frame |
Zoom ratio |
13.5X optical zoom (0.26X to 3.5X), |
|
Number of attaching objective lenses |
up to 2 pieces |
||
DSX dedicated objective lens |
XLMPLFLN10X, XLMPLFLN40X |
||
Mountable |
UIS2 objective lens |
MPLFLN1.25X, MPLFLN2.5X, MPLFLN5XBDP, MPLFLN10XBDP, |
|
MPLFLN20XBDP, MPLFLN50XBDP, LMPLFLN10XBD, |
|||
LMPLFLN20X, LMPLFLN50X, MPLAPON50X |
|||
Accuracy and repeatability (X-Y plane) |
Accuracy of magnification |
±3%*2 |
|
Repeatability of magnification |
3σn-1= ±2% |
||
Repeatability (Z axis) |
Repeatability of height |
– |
|
Illumination |
Embedded standard |
Bright field: LED, Dark field: LED |
|
Optional illumination |
High intensity LED*1 |
||
Camera |
Image sensor |
1/1.8 inch, 2.01 megapixels, color CCD |
|
Total pixels : 1688 (H) x 1248 (V) |
|||
Available pixels : 1628 (H) x 1236 (V) |
|||
Effective pixels : 1600 (H) x 1200 (V) |
|||
Cooling method |
Peltier cooling |
||
Scan mode |
Progressive scan |
||
Frame rate |
15 fps/27 fps with binning mode |
||
Image size |
Normal : 1194 x 1194 (1:1)/1592 x 1194 (4:3) |
||
Fine : 1194 x 1194 (1:1)/1592 x 1194 (4:3) |
|||
Super fine : 3594 x 3594 (1:1)/4792 x 3594 (4:3) |
|||
Sensitivity |
ISO 100/200/400/800/1600 equivalent |
||
Focusing unit |
Stroke |
35 mm |
|
Resolution |
0.01 μm |
||
Maximum sample height |
DSX dedicated |
– |
|
UIS2 objective lens |
– |
||
Stage |
Motorized stage |
Model |
DSX-IFSSU |
Stroke |
50 x 25 mm*3 |
||
Load capacity |
1 kg |
||
Manual stage |
Model |
DSX-SFR |
|
Stroke |
50 x 25 mm*3 |
||
Load capacity |
1 kg |
||
LCD monitor |
Size |
23” with touch panel and Full HD color LCD monitor |
|
Resolution |
1920 (H) x 1080 (V) |
||
Weight |
(Main frame, Motorized stage, |
Approx. 44.1 kg |
|
Input rating |
100-120 V/220-240 V, 300 V A, 50/60 Hz |
*1 Cannot be used with the embedded standard LED.
*2 Calibration by Olympus or dealer specialists necessary.
*3 When the objective lens MPLFLN50XBDP or MPLAPON50X is attached, the stroke is 25 x 25 mm.