Open time: 8 : 00 AM - 5 : 30 PM (Monday - Saturday)
Open time: 8 : 00 AM - 5 : 30 PM (Monday - Saturday)
Available on backorder
In some cases, such as the measurement surface of uneven or with a narrow flat area and the bottom of deep hollow, it may be impossible to achieve the proper results because of the difficult contact of the presser foot. The Deep Hole (H) type and the Long Leg (L) type make such measurements possible with a small or long presser foot. Both are supplied with Peak Pointer and the upper/lower limiters. The Long Leg type meets also to DIN 53505 standard.
| Model | GS-720H |
| Type | Type D |
| Application / Materials | Hard rubber / Deep hole type (narrow hole) |
| Conform Standards | JIS K 6253, ISO 7619 ASTM D 2240 |
| Presser Foot Diameter (mm) | φ12 |
| Spring Load Value 0-100 | 0-44450mN （0-4533gf） |
| Indentor Shape (mm) | Conical Cone ofＲ0.1 with 30° angle |
| Indentor Height(mm) |
2.5 |
| Weight (g) |
120 |