Open time: 8 : 00 AM - 5 : 30 PM (Monday - Saturday)
Open time: 8 : 00 AM - 5 : 30 PM (Monday - Saturday)
Available on backorder
In some cases, such as the measurement surface of uneven or with a narrow flat area and the bottom of deep hollow, it may be impossible to achieve the proper results because of the difficult contact of the presser foot. The Deep Hole (H) type and the Long Leg (L) type make such measurements possible with a small or long presser foot. Both are supplied with Peak Pointer and the upper/lower limiters. The Long Leg type meets also to DIN 53505 standard.
| Model | GSD-719K-L |
| Type | Type A |
| Application / Materials | General rubber / Long leg type (thick hole) |
| Conform Standards | JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240, DIN 53 505 |
| Presser Foot Diameter (mm) | φ18 |
| Spring Load Value 0-100 | 550-8050mN （56.1-821.1gf） |
| Indentor Shape (mm) | Truncated Cone of φ 0.79 with 35° angle |
| Indentor Height(mm) |
2.5 |
| Weight (g) |
380 |