Open time: 8 : 00 AM - 5 : 30 PM (Monday - Saturday)
Available on backorder
Type | Long type | |
Display specification | Digital | |
Measurement target | Hard rubber/hard plastic/ebonite | |
Category in standards | Type D | |
Applicable standard | JIS K 6253, JIS K 7215, ASTM D 2240, ISO 868, ISO 7619, DIN 53 505 | |
Needle shape | Shaft diameter | ø1.25mm |
Tip shape | Cone | |
Tip angle | 30° | |
Tip diameter | – | |
Tip curvature | 0.1 | |
Pressure surface shape | ø18mm | |
Protrusion of needle from pressure surface | 2.5mm | |
Minimum graduation | 0.1 ̊ | |
Loading device WE, WA, WD, spring force (mN) HE, HA, HD hardness | Coil spring method WD=444.5HD (HD: 20 to 90) (20 ̊ 8890mN, 90 ̊ 40005mN) |
|
Accuracy of spring force | ±392.3mN | |
Functions | Hold function Output function: Digimatic interface for printer Tolerance judgment Function lock |
|
External dimensions | Digital long Approx. 60(W)×28.5(D)×193(H)mm | |
Mass | 310g | |
Power supply | Button type silver oxide battery SR44 |
Digital / Dial Durometers are suitable for testing the nature of the following materials -natural rubber, neoprene, polyesters, P.V.C., leather, nitrite rubber, wax, vinyl, cellulose acetates, glass polystyrene, etc.
Technical Data
Testing stand applications
These stands are used to mount Durometers. They allow constant-pressure hardness measurement by pressing the Durometer vertically on a work piece.
Holds the display value at any time during measurement so that you can easily check the measurement result.