In case of measuring with durometer by pushing by hand, measuring values vary in some degree due to individual difference. Therefore, Measuring stand is materialized as measuring method for high reproducibility, which is prescribed in JIS and ISO.
Manual Operation type Durometer Stand with Speed Controller
- Speed controller with high reliability is adopted for moving down speed adjustment unit.
- Alignment unit which realizes high contact between indenter (contact point) of durometer and test piece is mounted.
- 65mm for analog and 40mm for digital are obtained for possible measuring range.
- Shaft with square thread is adopted that can prevent holder falling down and moving up and down.
- 1kg can be measured by type A and type E durometer as they are. Measuring by type D needs optional weight ZY-046 for measuring 5kg.. Digital durometer GSD series needs optional weight ZY-090 for measuring 1kg..
- Calibration certificate of mass (with durometer) can be issued, which are prescribed in ISO / JIS
Pressure Value |
Applicable Durometer Model |
Weigt Code-No. |
1Kg |
Analog |
ZY-078 (Accessory) |
A , B , E , A(Old) ,
TypeC(ASKER C) , O |
Digital |
ZY-079 (Option) |
4Kg |
ZY-046 (Option) |
D , ASTM C , DO , JIS C(old type) |
|
Weight |
8.5kg |