Measuring
Microscope
MF-UC2010D

Contact
MF-UC2010D
Mitutoyo
Contact

Available on backorder

Catalogue

Observation and Inspection of Small Areas

By using various modes of illumination, the MF Series can more precisely reproduce the colors and shapes of objects that are observed and inspected. The MF-U Series microscopes are high value-added instruments that offer microscope observation functions such as dark-field mode (to observe surface scratches and small steps, which are difficult to see in bright-field mode), simple polarization (to observe coloration or contrast through the polarizer or analyzer using polarization properties), and differential interference (to observe small surface steps and other elements in color contrast using a polarizing filter with a differential interference prism), as well as measurement functions.

Easy Image Photography

Anyone can easily photograph microscope images by attaching a digital camera to the microscope. Because a general-purpose C-mount adapter is used, any digital camera model that supports C-mounting can be attached. For example, several people can simultaneously analyze and evaluate the microscope image displayed on the monitor, or generation of an inspection chart attached to the image can be automated.

Measuring Microscopes MF Series

New optional sliding nosepiece allows one of two objectives to be quickly moved into position to change the magnification, and a circular illuminator to be fitted. Operability has improved in this series by allowing freedom of mounting position for the digital display.

High Visibility Digital Display

Because the resolution can be switched to 1μm, 0.5μm, or 0.1μm for the digital display (two or three axes), which is a standard accessory for all models, high-discrimination measurement  an be performed. The zero set, direction changeover, and smoothing functions are also standard. (Zero can be set using the switch near the X or Y handwheels.) The display is low-profile but has large digits and can be mounted in the position most convenient for the operator. The digital display can be installed on the left or right side of the column. Because the general- purpose RS-232C format is adopted for data transfer, data can be output to a standard printer or personal computer. It is also possible to output the display readings to spreadsheet software.

Height Measurement with a High Focus Repeatability

Focus repeatability is important when measuring a vertical step or other element using the microscope.
In particular, measurement errors due to the depth of focus of the objective are inevitable. The MF and MF-U Series measuring microscopes have a focus pilot, which enhances focus repeatability. The focus pilot is mounted on the TV camera port section in the main unit as an add-on unit and enables focusing position detection with high accuracy and repeatability. This realizes higher repeatability than a visual check and decreases variation in measured values caused by human error.

Wide-Field Observation

The best-in-class eyepiece field number* of 24mm (for WF10X) offers a wide viewing field that helps prevent extended observation or measurement from affecting your eyes or causing fatigue. The WF10X eyepiece has wider diopter adjustment ranges on the left and right sides than older products.

LED and Halogen Light Options for Transmitted and Reflected Illumination

Specifications

Order Number MF-UC2010D
176-882-10
XY stage travel range 8x4in
200x100mm
Z-axis travel range 0-6in
0-150mm
Focusing method Manual focusing
coarse focusing:10mm/rev
fine focusing:0.1mm/rev
Measurement method Linear encoder
2-axis model:X/Y-axis
3-axis model:X/Y/Z-axis
Resolution (switchable) .0001″/.00005″/.00001″
0.001mm/0.0005mm/0.0001mm
Measuring accuracy(at 20 °C) XY-axis(2.2+0.02L)µm
L=Measuring length(mm)
when not loaded
JIS B 7153
Indication accuracy(20 °C) Z-axis:(5+0.04L)µm
L=Measuring length(mm)
Floating function X and Y axis
with Quick-release mechanism
XY stage top size 14x11in
350x280mm
Effective glass size 10x6in
250x150mm
Swiveling function
Max. stage loading 44lbs/20kg
Max.workpiece height 6in/ 150mm