Open time: 8 : 00 AM - 5 : 30 PM (Monday - Saturday)
This is a PC-compliant form measuring system which allows you to measure roundform geometry like cylindricity.
Available on backorder
Analysis results such as cylindricity and coaxiality can be visually expressed in 3D graphics.
Equipped with highly accurate turntable that enables simple and Accurate centering and leveling of the workpiece. Operator can adjust centering and leveling by analog micrometer heads easily using misalignments guidance.
The customer can create reports in custom formats by specifying how the analysis results will be displayed, as well as the sizes and positions of graphics. The analysis result window can be directly utilized as a layout window. Since the measurement procedure, including the layout information, is saved, the entire process, from measurement start, calculation, result saving, and finally to printing, can be automatically executed.
Turntable | |
Rotational accuracy (radial): | (0.02+6H/10000)μm |
Rotational accuracy (axial): | (0.02+6X/10000)μm |
H: Probing height (mm), X: Probing radius (mm) | |
Rotational speed: | 4, 6, 10rpm |
Table top diameter: | ø5.9”(150mm) |
Centering range: | ±3mm (with DAT function) |
Leveling range: | ±1° (with DAT function) |
Maximum probing diameter: | ø11”(ø280mm) |
Maximum workpiece diameter: | ø22”(ø560mm) |
Maximum table loading: | 55lbs(25kg) |
Vertical column (Z-axis) | |
Vertical travel: | 11.8”(300mm) |
Straightness (in narrow range: | 0.20μm / 100mm |
Straightness (in entire range): | 0.30μm / 300mm |
Parallelism with turntable axis: | 1.5μm / 300mm |
Positioning speed: | Max. 15mm/s |
Measuring speed: | 0.5, 1, 2, 5mm/s |
Maximum probing height (ID/OD): | 11.8”(300mm)*1 |
Maximum probing depth: | 91mm (over ø32) 3.6”(over ø1.26”)((91mm (over ø32)) 1.97”(over ø0.27”)((50mm (over ø7)) |
Horizontal arm (X-axis) | |
Horizontal travel: | 6.5”(165mm) (From table axis -1~±5.5” ((-25mm – ±140mm)) |
Positioning speed: | Max. 15mm/s |
Measuring speed: | 0.5, 1, 2, 5mm/s |
Probe and stylus | |
Measuring range: | ±400μm / ±40μm / ±4μm |
Measuring force: | 10–50mN (5 level switching) |
Standard stylus: | 12AAL021, carbide ball, ø1.6mm |
Measuring direction: | Bi-directional |
Stylus angle adjustment: | ±45° (with graduations) |
Air supply | |
Air pressure: | 0.39MPa (4kgf/cm2) |
Air consumption: | 22L/min. |
Power supply: | 100V AC – 240V AC, 50/60Hz |
Dimensions (W x D x H): | 35 x 19.3 x 33”(890 x 490 x 840mm) |
Mass: | 375lbs(170kg) |