Open time: 8 : 00 AM - 5 : 30 PM (Monday - Saturday)
Available on backorder
It is capable of 3D Surface Roughness/Contour measurement and analysis*1 by using X-direction n2D measurement data and high accurate Y-axis positioning table, 3D/Y-axis table*2.
*1 Require option software FORMTRACEPAK-PRO or MCubeMap
*2 Does not support Y-direction 2D measurement and X/Y-direction inclined measurement.
Optional accessory that tilts the drive unit to allow its easy alignment with a large or heavy workpiece that cannot be mounted on the auto-leveling table.
Optional holders are available that allow manual change of the detector’s orientation.
The crank orientation enables surface roughness measurement of a crankshaft (in the axial direction). The upward/downward orientation enables roughness measurement on a upper/lower surface of a hole without needing an extra setup. Furthermore, S-3000MR provides a 100mm longer reach than the other holders, thus enabling measurement in a deep hole (in its upward or downward orientation).
Model No. | SV-3200H8 | |
Measuring range | X-axis | 100mm |
Z1-axis (detector) | 800μm / 80μm / 8μm | |
Z2-axis (column) traverse range | 500mm | |
X-axis inclination angle | ±45° (only for a model with the X-axis leveling device) | |
Detector detection method | Differential inductance | |
Resolution | X-axis | 0.05μm |
Z1-axis (detector) | 0.01μm, 0.001μm, 0.0001μm | |
Z2-axis (column) | 1μm (ABS scale) | |
Drive speed | X-axis | 0 to 80mm/s and manual operation |
Z2-axis (column) | 0 to 30mm/s and manual operation | |
Straightness | (0.1+0.002L) μm | |
Measuring force | Depends on model No. (suffix -1: 0.75mN; -2: 4mN) | |
Stylus tip | Depends on model No. (suffix -1: 60°, R2μm; -2: 90°, R5μm) | |
Base size (width × depth) | 600×450mm | |
Base material | Gabbro |