Surface Measuring
Surftest
SV-3200W8

Contact
SV-3200W8
Mitutoyo
Contact

Available on backorder

Catalogue

Features

  • This high-accuracy, multi-functional stylus type 2D surface roughness tester delivers best-in-class positioning speed (X-axis: up to 80mm/s, Z-axis: up to 30mm/s).
  • Powerful options added to the accessory lineup allow a big reduction in total setting, measurement and evaluation time required.

3D Surface Roughness Measurement

It is capable of 3D Surface Roughness/Contour measurement and analysis*1 by using X-direction n2D measurement data and high accurate Y-axis positioning table, 3D/Y-axis table*2.
*1 Require option software FORMTRACEPAK-PRO or MCubeMap
*2 Does not support Y-direction 2D measurement and X/Y-direction inclined measurement.

Easy Drive Unit Alignment

Optional accessory that tilts the drive unit to allow its easy alignment with a large or heavy workpiece that cannot be mounted on the auto-leveling table.

Adaptable Detector Orientation

Optional holders are available that allow manual change of the detector’s orientation.

The crank orientation enables surface roughness measurement of a crankshaft (in the axial direction). The upward/downward orientation enables roughness measurement on a upper/lower surface of a hole without needing an extra setup. Furthermore, S-3000MR provides a 100mm longer reach than the other holders, thus enabling measurement in a deep hole (in its upward or downward orientation).

 

Specifications

Model No. SV-3200W8
Measuring range X-axis 100mm
Z1-axis (detector) 800μm / 80μm / 8μm
Z2-axis (column) traverse range 500mm
X-axis inclination angle ±45° (only for a model with the X-axis leveling device)
Detector detection method Differential inductance
Resolution X-axis 0.05μm
Z1-axis (detector) 0.01μm, 0.001μm, 0.0001μm
Z2-axis (column) 1μm (ABS scale)
Drive speed X-axis 0 to 80mm/s and manual operation
Z2-axis (column) 0 to 30mm/s and manual operation
Straightness (0.1+0.002L) μm
Measuring force Depends on model No. (suffix -1: 0.75mN; -2: 4mN)
Stylus tip Depends on model No. (suffix -1: 60°, R2μm; -2: 90°, R5μm)
Base size (width × depth) 1000×450mm
Base material Gabbro