Open time: 8 : 00 AM - 5 : 30 PM (Monday - Saturday)
Cho phép đặt hàng trước
Model | MX2-5000N |
Capacity | 5000N |
Speed | Digital 0.5 to 300mm/min [0.5 – 20mm/min: by 0.5mm/min] [20 – 100mm/min: by 5mm/min] [100 – 300mm/min: by 10mm/min] |
Max. Sample Height*1 |
Approx. 380mm |
Rigidity | [Standard models] less than 0.5mm, |
[extended column (optional less than 1.0mm |
|
Stroke Limit | Controllable with upper and lower knob |
Measuring Modes |
Manual / Jog / Cycle mode |
Functions | Counter (number of tests to repeat): Max. 65535 times Timer (pausing time): Up to 99 min 59 sec 9 (by 0.1 sec) |
Control | Emergency stop, force control (*2), overload prevention (*2, *3) |
Operating temperature humidity |
0 to +40 degree Celsius 35 to 70% (avoid condensation) |
Voltage | AC100 to 240V, 50/60Hz (Select from 100, 120 and 230V. Accessories are provided accordingly.) |
Power Consumption |
150W |
Weight | Approx. 51kg |
Accessories | Operation manual, power cable, spare fuse, tools, carrying handle, yellow cap |
GF-2 (Grip mounting adaptor), mounting plate for standard force gauge |
|
Available Options *4*5*6 |
-EXT: Extended column by 200mm (*8) -CN: External signal input -S: Length scale -FA: Inbuilt linear scale |
Mountable Force Gauge *9 |
Mechanical Force Gauge: FB, PS, PSM series Digital Force Gauge: DST, DSV, ZTS, ZTA series (up to 1000N) Load cell: DPU series (up to 500N *10) |
Mechanical Force Gauge: PSH series Digital Force Gauge: ZTS, ZTA series (Over 2500N) |
*1 Max. sample height refers to the distance between the table and the tip of force gauge measuring shaft when the head is at the top.
(MX2-500N/MX2-1000N: up to 1000N model of ZTS/ZTA series, IMADA MX2-5000N: With over 2500N model of ZTS/ZTA series
is mounted.)
*2 ZTS/ZTA series force gauge and optional cable CB-528 are required.
*3 It does not guarantee complete protection against overloading.
*4 Add the option code after the model name to complete the model with options.
e.g. When adding long stroke option to MX2-500N … Model: MX2-500N-L
*5 Capacity is reduced as below by some speed change options.
MX2-500N: -V600 capacity 250N, –V900 capacity 150N MX2-1000N:-V750 capacity 500N, –V1000 capacity 250N
*6 Amplifier such as ZTA and FA Plus2 (sold separately) or software are required to record measuring value of linear scale.
*7 Additional charge for wooden packing (Japan domestic shipping) or LVL wooden packing (oversea shipping) are required for shipping.
*8 The stroke does not extend. It extends the column of test stand and max. sample height is approx. 580mm.
*9 Ensure to use within the capacity of force gauge and test stand regardless of the mountable models.
*10 Mounting block (sold separately) is required to mount over 1000N range of DPU to IMADA MX2-5000N.