Đồng hồ so điện tử
543-300
12,7mm ; 0,001mm

Liên hệ
Đồng hồ 543-300
Mitutoyo
Liên hệ

Cho phép đặt hàng trước

Catalogue

Đồng hồ so điện tử 543-300

 Thông số kỹ thuật đồng hồ so 543-300

543-300.eps

Range:
12.7 mm
Digital step:
0,001 mm
Repeatability:
0,002 mm
Inch-Metric:
Metric
Max. Permissible Error (Total Range):
0,003 mm
Hysteresis:
0,002 mm
H MPE (Hysteresis):
0,002 mm
Type:
EN ISO Standard
Mass:
170 g
Data output:
Yes
Measuring force:
≤ 1,5 N
Scale:
Capacitance type, ABSOLUTE linear encoder
Max. response speed:
Unlimited
Stem Ø:
8 mm
Contact point:
Carbide ball, thread M 2.5 x 0.45 mm 
Alarm:
Low voltage, ABS composition error, overflow error, tolerance limit setting error
Power supply:
1 battery CR-2032
Battery life:
Standard mode: approx. 1 year
fast mode: approx. 4.5 month
Display:
LCD, character height: 8 mm, rotatable 330°
Protection:
IP42
Max. response speed:
Unlimited
Measurement frequency (MAX/MIN/RANGE):
Standard mode: 10 times/s
fast mode: 50 times/s
(plunger speed max. 50 µm/s for peak measurement)
Delivered:
Including 1 battery
Low voltage alarm:
Yes
Counting direction switchable:
Yes
ZERO/ABS:
Yes
GO/±NG judgement:
Yes
Digimatic data output:
Yes
ON/OFF:
Yes
Lock function:
Yes
Fast measurement mode:
yes
MAX/MIN/RANGE:
Yes
PRESET 3x:
Yes
Analog bar resolution switchable:
Yes
Function lock:
Yes
Calculation function (with formula):
Yes
Power supply report:
UN 38.3 Test Summary Report
Digital/Analog:
Digital

This indicator is the MAX/MIN/RANGE value holding function model .It offers the following benefits:

  • The MAX/MIN/RANGE (run-out value) can be measured
  • A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably
  • Easy indicator setup via a setup menu
  • Analogue bar graph in the display (12 different scales switchable)  
  • GO/±NG tolerance judgement function
  • This indicator enables the use of a calculation function for the measured value Ax
  • Coefficient A is freely definable and x = displacement of the plunger
  • A USB interface box can be used to set up the indicator from PC via dedicated software

Xem thêm đồng hồ so tại đây.